Used Mach.
Contact Us
About Us
CH Series
Heat Seal
Cold Seal

Machine Specification ~
Machine Options Include but are not Limited to the following ~
CH Series machines are a combination of our Cold Seal Machines used in conjunction with heat seal technology. The material used for this equipment is strip coated with the cold seal latex on the first inch or so of the edges which becomes the side seals of the package. The length / end seals of the package are done with heat seal technology. Materials are limited to heat sealable material. - NO paper or Corrugated.
Extended Roll Holders for Larger Diameter Rolls of Material
Custom Funnels and Accumulators
Exit Conveyors that remove Finished Packages
Verifying Scanners and Rejection Stations
Barcode Scanners
Print and Apply Label Applicators
Roll Printers or Coder
This machine uses two Rolls of Strip Coated bubble or polyethylene
Both webs of material come together and create a V-Shaped area in which to place products into.
Custom Funnels and Guides can be supplied for the various product ranges.
The Side Seals and Length Cutoff are done simultaneously in the sealing head of the system.
The machine uses pre set length adjustment to regulate the package size.
Machine operation and setup are done through the touch screen controller.
This allows the operator to make adjustments quickly and easily.
The system is available in 12" and 15" Wide Models
The maximum Width and Height through the machine varies upon Model
The CH-45 has a 3 1/4" Deep Package Capability
It uses 220-440 V.A.C. and 80 PSI
The units can run packages up to 15 TO 20 packages per minute