MODEL_900

•	This machine uses two Rolls of Cold Seal Material to make the protective pouch.
•	The lower web of the material runs over the infeed table and carries the product into the sealing portion.
•	This is where the Upper Roll of material joins the product to form the protective pouch.
•	The end seals and length cutoff are done simultaneously in the sealing head of the system.
•	The machine uses pre set length counters to regulate the package size.
•	Machine operation and setup are done thru the touch screen controller.
•	This allows the operator to make adjustments quickly and easily.
•	The system is available in 12" , 18" , 24" and 36" Wide Models
•	The maximum Width and Height thru the machine varies upon Model
•	The 900-12 has a 2-1/2" High Package Capability
•	The 900-18 and the 900-24 have a 5" High Package Capability
•	While the 900-36 and the 900-24-8 have a 8" High Package Capability
•	Length thru the system is only limited by what can be supported on the Infeed Table
•	Most all cold seal materials can be run on the model 900, these include: Corrugated Polyethylene Kraft Papers Foams Bubble
•	The standard system has a 5' Infeed Table and a 3' Exit Conveyor
•	It uses 110 V.A.C. and 80 P.S.I.
•	The unit can run packages up to 35 packages per minute
•	Machine supplied with standard roll holders

•	Pneumatic Spindle Roll Stands for Quick Material Change Over
•	Power Unwind units for certain cohesive materials
•	Extended Infeed Tables and Exit Conveyors
•	Double Stop Option is Available for Easy Loading of Longer Products
•	Fold over opening device
•	Perforators for easy open packages
•	Barcode Scanners
•	Print and Apply Label Applicators
•	Roll Printers or Coders