Model 900 ~

System Packaging Model 900 Packaging Machine

Ideal for packaging batch or similar sized products. Products range from books, catalogs, CD's, Machined Parts, and Knife Blades to Window Blinds, Moldings and Trim

Machine Specification ~

  • This machine uses two Rolls of Cold Seal Material to make the protective pouch.
  • The lower web of the material runs over the infeed table and carries the product into the sealing portion.
  • This is where the Upper Roll of material joins the product to form the protective pouch.
  • The end seals and length cutoff are done simultaneously in the sealing head of the system.
  • The machine uses pre set length counters to regulate the package size.
  • Machine operation and setup are done thru the touch screen controller.
  • This allows the operator to make adjustments quickly and easily.
  • The system is available in 12", 18", 24" and 36" Wide Models
  • The maximum Width and Height thru the machine varies upon Model
  • The 900-12 has a 2-1/2" High Package Capability
  • The 900-18 and 900-24 have a 5" High Package Capability
  • While the 900-36 has an 8" High Package Capability
  • Length thru the system is only limited by what can be supported on on the Infeed Table
  • Most all cold seal materials can be run on the model 900, these include:
    • Corrugated
    • Polyethylene
    • Kraft Papers
    • Foams
    • Bubble
  • The Standard System has a 5' Infeed Table and a 3' Exit Conveyor
  • It uses 110 V.A.C. and 80 PSI
  • It has a Single roll stand mounted prior to the Infeed Table and one above the sealing head
  • It also has a touch Screen controller with a built in Batch Counter
  • The units can run packages up to 35 packages per minute
  • Machine supplied with standard roll holders
  • The pnematic spindle with both rolls mounted in the rear.
Machine Options Include but are not Limited to the following ~