Model 900 Double Web Machine
Machine Specifications:
- This machine uses two rolls of cold seal material to make the protective pouch
- The lower web of the material runs over the infeed table and carries the product into the sealing portion which is where the upper roll of material joins the product to form the protective pouch
- The end seals and length cutoff are done simultaneously in the sealing head of the system.
- The machine uses pre-set length counters to regulate the package size
- Machine operation and setup are done through the touchscreen controller which allows the operator to make adjustments quickly and easily
- The system is available in 12, 18, 24, and 36″ wide models
- The maximum width and height through the machine varies upon model
- The 900-12 has a 2.5″ high package capability
- The 900-18 and the 900-24 have a 5″ high package capability
- While the 900-36 and the 900-24-8 have a 8″ high package capability
- Length through the system is only limited by what can be supported on the infeed table
Machine options include, but are not limited to the following:
- Pneumatic spindle roll stands, for quick material change over
- Power unwind units for certain cohesive materials
- Extended infeed tables and exit conveyors
- Double stop option is available for easy loading of longer products
- Fold over opening device
- Perforators for easy open packages
- Barcode scanners
- Print and apply label applicators
- Roll printers or coders
Features:
- Touch-screen control panel
- Powered pull-roll tire adjustment, and infeed height adjustment
- Length adjustments in 1/2” increments (via touch screen)
- No warm-up or cool-off time
- Hand-fed or automatic operation
Material Substrates That Can Be Run On
- All of the material has to be cohesive coated
Have any questions? Feel free to reach out to one of our experts.